Appearance
Unisex Staple T-Shirt | Bella + Canvas 3001
The Unisex Staple T-Shirt feels soft and light with just the right amount of stretch. It's comfortable and flattering for all. We can't compliment this shirt enough–it's one of our crowd favorites, and it's sure to be your next favorite too!
- Solid colors are 100% Airlume combed and ring-spun cotton
- Ash color is 99% combed and ring-spun cotton, 1% polyester
- Heather colors are 52% combed and ring-spun cotton, 48% polyester
- Athletic and Black Heather are 90% combed and ring-spun cotton, 10% polyester
- Heather Prism colors are 99% combed and ring-spun cotton, 1% polyester
- Fabric weight: 4.2 oz/yd² (142 g/m²)
- Pre-shrunk fabric
- 30 singles
- Side-seamed construction
- Tear-away label
- Shoulder-to-shoulder taping
- Blank product sourced from Guatemala, Nicaragua, Mexico, Honduras, or the US
DANGER
Measurements are provided by suppliers. US customers should order a size up as the EU sizes for this supplier correspond to a smaller size in the US market. Product measurements may vary by up to 2" (5 cm).
A Length
Place the end of the tape beside the collar at the top of the tee (Highest Point Shoulder). Pull the tape measure to the bottom of the shirt.
B Chest
Measure yourself around the fullest part of your chest. Keep the tape measure horizontal.
Find your size (Inches)
| SIZE | LENGTH | CHEST |
|---|---|---|
| XS | 27 | 31 - 34 |
| S | 28 | 34 - 37 |
| M | 29 | 38 - 41 |
| L | 30 | 42 - 45 |
| XL | 31 | 46 - 49 |
| 2XL | 32 | 50 - 53 |
| 3XL | 33 | 54 - 57 |
| 4XL | 34 | 58 - 61 |
| 5XL | 35 | 62 - 65 |
Find your size (Centimeter)
| SIZE | LENGTH | CHEST |
|---|---|---|
| XS | 68.6 | 78.7 - 86.4 |
| S | 71 | 86.4 - 94 |
| M | 73.7 | 96.5 - 104 |
| L | 76.2 | 106.7 - 114.3 |
| XL | 78.7 | 116.8 - 124.5 |
| 2XL | 81.3 | 127 - 134.6 |
| 3XL | 83.8 | 137.2 - 144.8 |
| 4XL | 86.4 | 147.3 - 155 |
| 5XL | 89 | 157.5 - 165 |
WARNING
Product measurements may vary by up to 2" (5 cm).
DTG disclaimers
- We don't print white ink on white garments. Any designs containing white color will have areas with no print on them.
- Light ink elements on bright-colored garments might look tinted. This is most evident on Red, Maroon, and other similarly colored garments.
- There might be slight discrepancies in print placement.
Embroidery disclaimers
- If it's physically possible to digitize your graphic, we'll digitize it. If your design doesn't meet our guidelines, we can't guarantee desirable results.
- We use a run stitch for fine details in flat embroidery.
- The generated preview on the mockup is for visual reference only and will not always match the final result.
File guidelines
Embroidery
| Placement | Sizes | Max embroidery area | Embroidery file size | Embroidery file template |
|---|---|---|---|---|
| Left chest | All sizes | 10.16 × 10.16 cm | Download | |
| Centered | All sizes | 10.16 × 10.16 cm | Download | |
| Large Center | All sizes | 25.40 × 15.24 cm | 25.40 × 15.24 cm | Download |
Embroidery types
WARNING
Please use embroidery template for the embroidery layouts.
Flat embroidery
- Flat embroidery is a technique where stitches are embroidered flat
- Minimum thickness for shapes: 0.05″ (1.3 mm)
- We use satin stitch for shapes between 0.05″ (1.3 mm) and 0.5″ (12.5 mm)
- We use tatami stitch for shapes thicker than 0.5″ (12.5 mm)
- Minimum height for lowercase letters: 0.25″ (6.4 mm)
- Minimum height for uppercase letters: 0.3″ (7.6 mm)
- Any text smaller than 0.25″ (6.4 mm) in height will be a run stitch
WARNING
Must-follow guidelines
Design true-to-size graphics The graphics you upload must be true to their size on the end product.
Use solid shapes and colors only Don't include photographic images, gradients, fade or blend effects. Elements like these cannot be embroidered.
Use transparent backgrounds Graphics should include transparent backgrounds. Elements outside the main design will be picked up and result in unwanted embroidery stitches on the end product.
Outline your fonts All fonts should be converted to outlines unless your graphic is in PNG format. That way you don't have to send us the font files.
Submit vector files in PDF format We highly recommend submitting your embroidery graphics as vector files (PDF). Raster graphics (PNG) can be used as well if the resolution of the graphic is at least 300 DPI.
Stay within the maximum stitch count If your graphic covers a very large part of the embroidery area, it may exceed the maximum limit of 25,000 stitches (10″ × 6″) or 15,000 stitches (4″ × 4″). In such case, your order will be put on hold.
Remove embroidery file template guidelines If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll be embroidered.
TIP
Order samples The best way to make sure your embroidery design looks the way you want is to order a sample of your work. We also recommend ordering an embroidery sample to learn about our techniques and stitch types.
Follow our embroidery guidelines Check out this page for tips on how to create perfect embroidery files.
Create embroidery-unique designs Embroidery is not printing, so most graphics that work on other products won't be suitable for embroidery.
Keep it simple Clean designs with bold lines and text work best for embroidery. If your design is too complex (e.g. contains gradients or intricate details), your order will be put on hold.
Printing (DTG)
| Placement | Sizes | Print file size* | Print file template |
|---|---|---|---|
| Outside label | All sizes | 7.62 × 7.62 cm | Download |
| Front & back print | All sizes | 30.48 × 40.64 cm | Download |
| Sleeve print | All sizes | 10.16 × 8.89 cm | Download |
WARNING
Must-follow guidelines
Submit files in PNG or JPEG format with at least 150 DPI We recommend using PNG for designs with a transparent background. For other designs, we advise preparing files in JPEG instead.
Create files in sRGB color profile To ensure your design looks the same when printed as it does on screen, make sure you create your print file in sRGB color profile.
Remove print file template guidelines If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll show up on the print.
TIP
Order samples The best way to make sure your embroidery design looks the way you want is to order a sample of your work. We also recommend ordering an embroidery sample to learn about our techniques and stitch types.
Remember the side and back design option You can embroider a small design (e.g. your brand logo) on the back or either side of the hat. The design will be embroidered in flat embroidery.
Follow our embroidery guidelines Check out this page for the most common embroidery problems and tips on creating the perfect embroidery file.
Create embroidery-unique designs Embroidery is not printing, so most graphics that work on other products won't be suitable for embroidery.
Keep it simple Clean designs with bold lines and text work best for embroidery. If your design is too complex (e.g. contains gradients or intricate details), your order will be put on hold.