Skip to content
On this page

Unisex Organic Cotton T-Shirt | Stanley/Stella STTU755




This high-quality Organic Cotton T-Shirt is made of 100% organic ring-spun cotton—perfect for eco-conscious shoppers. The shirt is extra comfortable, so don't be surprised if it instantly becomes your favorite.


  • 100% organic ring-spun cotton
  • Fabric weight: 5.3 oz/yd² (180 g/m²)
  • Single jersey
  • Regular fit
  • Set-in sleeves
  • 1 × 1 rib at collar
  • Wide double-needle topstitch on the sleeves and bottom hems
  • Self-fabric neck tape (inside, back of the neck)
  • Blank product sourced from China or Bangladesh

WARNING

Note that we show the EU sizes for Stanley/Stella products. The sizes correspond to a smaller size in the US market, so US customers should order a size up.

DANGER

Measurements are provided by suppliers.

US customers should order a size up as the EU sizes for this supplier correspond to a smaller size in the US market.

Product measurements may vary by up to 2" (5 cm).

Measure yourself


Unisex Organic Cotton T-Shirt  Stanley Stella STTU755

A Length

Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.

B Chest

Measure yourself around the fullest part of your chest. Keep the measuring tape horizontal.

C Sleeve length

Place one end of the tape at the top of the set-in sleeve, then pull the tape down until you reach the hem of the sleeve.


Find your size (Inches)

SizeLengthChestSleeve length
S27 ¼31 - 348 ⅛
M28 ¼35 - 388 ½
L29 ⅛39 - 418 ⅞
XL29 ⅞42 - 458 ⅞
2XL30 ¾46 - 489 ¼

Find your size (Centimeter)

SizeLengthChestSleeve length
S6978.7 - 86.420.6
M7289 - 96.521.6
L7499 - 10422.6
XL76106.7 - 114.322.6
2XL78116.8 - 12223.6

Product measurements


Unisex Organic Cotton T-Shirt  Stanley Stella STTU755

A Length

Place the end of a measuring tape beside the collar at the top of the garment (high point shoulder). Pull the tape to the bottom of the item.

B Width

Place the end of the tape at the seam under the sleeve and pull the tape measure across the shirt to the seam under the opposite sleeve.

C Sleeve length

Place one end of the tape at the top of the set-in sleeve, then pull the tape down until you reach the hem of the sleeve.


Find your size (Inches)

Size LabelLengthWidthSleeve length
S27 ¼19 ¼8 ⅛
M28 ¼20 ½8 ½
L29 ⅛21 ¾8 ⅞
XL29 ⅞22 ¾8 ⅞
2XL30 ¾249 ¼

Find your size (Centimeter)

Size LabelLengthWidthSleeve length
S694920.6
M725221.6
L745522.6
XL765822.6
2XL786123.6

WARNING

Product measurements may vary by up to 2" (5 cm).

DTG disclaimers

  • We don't print white ink on white garments. Any designs containing white color will have areas with no print on them.
  • Light ink elements on bright-colored garments might look tinted. This is most evident on Red, Maroon, and other similarly colored garments.
  • There might be slight discrepancies in print placement.

Embroidery disclaimers

  • If it's physically possible to digitize your graphic, we'll digitize it. If your design doesn't meet our guidelines, we can't guarantee desirable results.
  • We use a run stitch for fine details in flat embroidery.
  • The generated preview on the mockup is for visual reference only and will not always match the final result.

File guidelines

Printing (DTG)

PlacementSizesPrint file size*Print file template
Outside labelAll sizes7.62 × 7.62 cmDownload
Front & back printAll sizes30.48 × 40.64 cmDownload
Sleeve printAll sizes10.16 × 8.89 cmDownload

WARNING

Must-follow guidelines

  • Submit files in PNG or JPEG format with at least 150 DPI We recommend using PNG for designs with a transparent background. For other designs, we advise preparing files in JPEG instead.

  • Create files in sRGB color profile To ensure your design looks the same when printed as it does on screen, make sure you create your print file in sRGB color profile.

  • Remove print file template guidelines If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll show up on the print.

TIP

Avoid semi-transparent designs Semi-transparent graphics (or elements with lowered opacity) don't translate well in DTG printing. We advise using solid colors, or simulating semi-transparency by halftoning (for more information, see our video tutorial).

Create designs with the necessary DPI Simply typing in a new resolution value into the file won't result in a higher resolution print. If your graphic's resolution is too low, the best solution is to recreate it.

Use transparency to your advantage Black ink will appear gray on black garments because of the white underbase used during printing. Leave these areas fully transparent when designing for black garments.

Avoid borders when designing sleeve prints We advise against using graphics with perfect borders for sleeve printing, since the print can warp slightly when the sleeve is being pulled off the pallet.

Embroidery

WARNING

Please use embroidery template for the embroidery layouts.

PlacementSizesMax embroidery areaEmbroidery file sizeEmbroidery file template
Left chestAll sizes10.16 × 10.16 cmDownload
CenteredAll sizes10.16 × 10.16 cmDownload
Large CenterAll sizes25.40 × 15.24 cm25.40 × 15.24 cmDownload

Embroidery types

Flat embroidery

  • Flat embroidery is a technique where stitches are embroidered flat on the shirt
  • Minimum thickness for shapes: 0.05″ (1.3 mm)
  • We use satin stitch for shapes between 0.05″ (1.3 mm) and 0.5″ (12.5 mm)
  • We use tatami stitch for shapes thicker than 0.5″ (12.5 mm)
  • Minimum height for lowercase letters: 0.25″ (6.4 mm)
  • Minimum height for uppercase letters: 0.3″ (7.6 mm)
  • Any text smaller than 0.25″ (6.4 mm) in height will be a run stitch

WARNING

Must-follow guidelines

  • Design true-to-size graphics The graphics you upload must be true to their size on the end product.

  • Use solid shapes and colors only Don't include photographic images, gradients, fade or blend effects. Elements like these cannot be embroidered.

  • Use transparent backgrounds Graphics should include transparent backgrounds. Elements outside the main design will be picked up and result in unwanted embroidery stitches on the end product.

  • Outline your fonts All fonts should be converted to outlines unless your graphic is in PNG format. That way you don't have to send us the font files.

  • Submit vector files in PDF format We highly recommend submitting your embroidery graphics as vector files (PDF). Raster graphics (PNG) can be used as well if the resolution of the graphic is at least 300 DPI.

  • Stay within the maximum stitch count If your graphic covers a very large part of the embroidery area, it may exceed the maximum limit of 15,000 stitches. In such case, your order will be put on hold.

  • Remove embroidery file template guidelines If you use our downloadable templates, delete the guide layers before saving your files. If you don't delete them, they'll be embroidered.

TIP

Order samples The best way to make sure your embroidery design looks the way you want is to order a sample of your work. We also recommend ordering an embroidery sample to learn about our techniques and stitch types.

Remember the side and back design option You can embroider a small design (e.g. your brand logo) on the back or either side of the hat. The design will be embroidered in flat embroidery.

Follow our embroidery guidelines Check out this page for the most common embroidery problems and tips on creating the perfect embroidery file.

Create embroidery-unique designs Embroidery is not printing, so most graphics that work on other products won't be suitable for embroidery.

Keep it simple Clean designs with bold lines and text work best for embroidery. If your design is too complex (e.g. contains gradients or intricate details), your order will be put on hold.